Vibrating Screen Mineral Processing Equipment 2470 Vibrating Screen Machine Linear Vibrating Screen Machine Large Mobile Circular Vibrating Screen

Add to My Favorites Download QR Code

Share product to :

Vibrating Screen Mineral Processing Equipment 2470 Vibrating Screen Machine Linear Vibrating Screen Machine Large Mobile Circular Vibrating Screen

Specifications :

Deposit

QTY

FOB PRICE
CIF PRICE

Please contact the supplier to get the latest CIF price
QUANTITY

-

+

PCS
TOTAL COST
$1660

Specification

Order No. : 102563,Yes,210123,Vibrating screen,Circular vibrating screen,Woven wire mesh,Sand, soil,Tian Ang,TA-1545/1860,9000*2300*3000,Coal,Beneficiation,4000,Brand New,15,4.5 m,30,3,200,300,For Industrial use,Deposit,ebay,Amazon,wish,AliExpress,Independent Station,LAZADA,Africa,Europe,South America,Southeast Asia,North America,Northeast Asia,Middle East,Yes,Yes,Filter

Material : Default

Packing Information

Pcs/Carton : N/A	Packing Size/Carton : N/A	Packing Vol/Carton : N/A
N.W./Carton : N/A	G.W./Carton : N/A	QTY in 40HQ : N/A
QTY in 40GP : N/A	QTY in 20GP : N/A

Product Introduction

安装操作：

1、振动筛运至工作场地，将四柱下平整并夯实，垫上枕木,然后把行走轮下砂土铲除使四立柱着力。筛砂机应左右处于水平状态（前后可略有不水平也可），检验水平以底梁为准。
2、在使用（工作）前应对设备进行空载运转（可单向试验再总体运行）对问题处进行调整,确认无误方可投入使用。设备工作时应先启动输送带，再启动转筛，后启动给料。停机时先停给料、再停转筛，等输送带无料时再停输送。如突然停电，应及时关闭送料,转筛输送电源，并将输送带砂清理至少二分，以免负载启动损坏设备。
保养与调节
振动筛分机工作环境不好，应及时定期进行维护保养以保证设备正常运转。
开机前检查减速机油位是否符合要求，不足时应补足，平时每周检查一次，对于外露轴承、轴套、十字轴每班（8小时）加油（润滑脂）一次，每天对角带松紧情况进行检查并做调整，发现断线，开胶应及时更换。（应记下各角带型号规格，储备备件以便应急）。
角带输送带为橡胶产品，使用几天会伸长产生松动达不到转动功率，应及时检查调整松紧程度。
输送机带发生走偏时应及时调整到中间位置，输送带主梁两端均有两个调节螺栓。调节时先松开轴承合螺栓，再向右向旋动螺母即可达到调节目的，两侧螺杆应调节相同尺寸，否则会跑偏。
如发现输送带跑偏，松开偏侧轴承合螺栓，并右旋主梁偏则螺母使头轮向外移动，便可达到校正目的。向右偏调紧右侧，向左偏调紧左侧。

• Amanbo Return Policy applies to all orders on amanbo.com.

• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.

• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.