QTY |
FOB PRICE |
CIF PRICE
QUANTITY
-
+
PCS
TOTAL COST
$1660Material : Default |
Pcs/Carton : N/A | Packing Size/Carton : N/A | Packing Vol/Carton : N/A |
N.W./Carton : N/A | G.W./Carton : N/A | QTY in 40HQ : N/A |
QTY in 40GP : N/A | QTY in 20GP : N/A |
纵缝咬口机是常见的一类汽车消声器设备配件,在生产汽车消声器设备的过程中纵缝咬口机起着很重要的作用,下面就这类汽车消声器设备的使用重点给大家介绍一下吧:
使用这类汽车消声器设备时,先调整好工作范围所需厚度(上下轧轮间隙),调整方法如下:
将内外轧轮调节螺母拧到底,然后反转.轧0.5mm材料时发转120度(1/3圈),轧1.0mm材料时发转240度(2/3圈),轧1.2mm材料时发转290度(约5/6圈).如果工作时材料打滑,系间隙过大,可将调整螺母再拧紧少许,调整好后须同时用两扳手将上下螺母间并紧,以防松动,但切忌间隙调整过小,以免机器损坏.
汽车消声器设备压筋轮调压杆可根据用户要求调节折筋高度,愈旋紧调压杆,折筋愈扁.反之折筋变高。
Longitudinal seam nip machine is a common kind of equipment accessories, car muffler equipment in the production of automobile muffler in the process of longitudinal seam nip machine plays a very important role, the following is the use of this kind of car muffler equipment key to introduce you to:
When using this kind of car muffler equipment, to adjust the scope of work required thickness () up and down rolling wheel clearance, adjustment method is as follows:
Will roll adjusting nut screw inside and outside, then reverse. When rolling 0.5 mm material hair turned 120 degrees (1/3 circle), rolling 1.0 mm material circle (2/3) hair turn 240 degrees, when rolling 1.2 mm material hair turned 290 degrees (about 5/6 circle.) if material slippage at work, clearance is too large, adjusting nut can be tighten a little again, adjust good must use two wrenches at the same time will be up and down between the nut and tight, loose in case, but the gap adjustment of avoid by all means is too small, in order to avoid the damage of the machine.
Car muffler equipment embossing wheel pressure regulating rod can be adjusted according to user requirements to fold rib height, tighten the regulating rod, fold the steel flat. Vice fold muscle get higher.
• Amanbo Return Policy applies to all orders on amanbo.com.
• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.
• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.