QTY |
FOB PRICE |
CIF PRICE
QUANTITY
-
+
PCS
TOTAL COST
$1660Order No. : 121,No,121-2,Other,1500,50-180,60,90,1.5,15,Rotary drilling rig,Surface drilling rig,Hydrogeological water well drilling rig,Shallow hole drilling machine,Manual drilling rig,Electric disc drilling machine,Bracket type drilling rig,Electric disc drilling machine 10 m,Electric disc drilling machine 20 meters,Electric disc drilling machine 30 m,Scaffolding drilling rig 20 m,Scaffolding drilling rig 30 m,No |
Material : Default |
Pcs/Carton : N/A | Packing Size/Carton : N/A | Packing Vol/Carton : N/A |
N.W./Carton : N/A | G.W./Carton : N/A | QTY in 40HQ : N/A |
QTY in 40GP : N/A | QTY in 20GP : N/A |
价格属性仅供参考,根据客户要求定制加工,详情请咨询客服。
或电话咨询:魏经理15163719371
小型电动打井机广泛应用于家庭打井,工厂打井,取生活用水,农田灌溉水井,安装水空调,太阳能热水器,工地打桩等,整机头重量约9公斤,携带方便。打井深度达60米,井眼直径50-180毫米。特殊规格可定制。电源:单相220V电机,可调速,可正反转。家用照明电就可以。
本款打井机采用了多齿轮设计,虽然增加了生产成本和制造工艺,但这样设计会让打井机力量很大(就像汽车一档比四档有力、还便于掌握一样的道理),打井有力,打井速度快、便于掌握。如果齿轮少了,一千瓦的电机还没有七百多瓦的电机力量大、而且转速高、打井时难于掌握。这款多齿轮结构钻井机经过许多用户多年使用,打井效果非常理想!
圆盘设计的优点:便于掌握,打井时可以随意转动方位,不会打伤人的头部和腰部。
注意:打井机只适合打纯土的地形,如用本机打地下有岩石之类的地形导致损坏的一概不退不换不保修。
手提式钻机打井井眼大小和深度参考:
直径100毫米以内的井眼 0-60米左右
直径100-120毫米的井眼 0-40米左右
直径120-160毫米的井眼 0-30米左右(井眼越大越打不深,打大井眼时要用一台2200瓦的大流量高扬程潜水泵冲水)
小型电动打井机打井方法
1.选择合适地点钻井眼。
2.选择合适的打井机。
3.打井前准备材料:选择合适的抽水用自吸泵或软轴泵,放井下用的PE塑料管。
4.选择合适的打井外翻用潜水泵或内吸用泥浆吸泵。如打井的地方不方便挖坑,请选用内吸方法打井,即钻机配合泥浆吸泵,用水少。
5.打井时,可把井眼旁边挖两个坑,前一个坑用于沉淀,后一坑放潜水泵,利用循环水。有的地方地层含沙较多,导致钻井时井下泥沙冲不出来,这时要在循环水里加些膨润土搅拌一下。这样可以保持水的浓度,井壁不易塌陷。
6.接好电源,将钻机、钻杆、钻头、手柄连接好,先开水泵后开钻机,打下一根钻杆后接上另一根再打(换钻杆时把钻机和钻杆向上提一些再换,防止井下塌陷将钻头出水孔堵住)。打井时要学会分析水层,一般打到地下沙层就是水层(水泵会冲出来大量沙粒),水会抽不干。
7.拨出钻杆后,快速将塑管放入井底。适量向管里打水,再接自吸泵向外抽水。
8.一些地下水量少的地方,可打大井眼,如打直径12厘米、16厘米井眼,下直径7厘米或直径11厘米的井管。
9.启动钻井机反转前,先用管子钳将接头松动后再反转,延长电机和齿轮寿命,启动钻机前先通水,减少水封磨损。尽量选用注水式,少用泥浆吸泵吸泥浆,因为容易将钻杆堵死吸不上泥。
济宁青木机械有限公司是支护设备、工矿机械配件、轨道设备等产品生产加工的公司,有完整、科学的质量管理体系。济宁青木机械有限公司的诚信、实力和产品质量获得业界的认同。欢迎各界朋友莅临参观、指导和业务洽谈。
联 系 人:魏延庆 先生 (销售部 经理)
移动电话: 15163719371
地 址:中国 山东 济宁市 济宁十一工业园
公司主页: https://qingmujixie.1688.com
• Amanbo Return Policy applies to all orders on amanbo.com.
• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.
• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.